Creating A Mykey - Lincoln NAVIGATOR 2017 Owner's Manual

• Various vehicle speed reminders so you
know when your vehicle approaches the
limits. Warnings appear in the information
display and an audible warning sounds
when you exceed the limit.
• Audio system maximum volume of 45%.
A message will be shown in the display
when you attempt to exceed the limited
volume. Also, the speed-sensitive or
compensated automatic volume control
will be disabled.
Settings
MyKey
Create MyKey
When prompted, hold the OK button until
you see a message informing you to label
this key as a MyKey. The key will be
restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from the
admin keys.
Navigator (TB5) Canada/United States of America, enUSA, Edition date: 201712, Second Printing
• Always on setting. When this is selected,
you will not be able to turn off Advance
Trac or traction control, 911 Assist or
Emergency Assistance, or Do Not Disturb
(if your vehicle is equipped with these
features).

CREATING A MYKEY

Use the information display to create a
MyKey:
Message
You can also program configurable settings
for the key(s). See Programming/Changing
Configurable Settings.
MyKey
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
55
1. Insert the key you want to program into
the ignition. See Starting a Gasoline
Engine (page 152). If your vehicle is
equipped with a push-button start, place
the remote control into the backup
position. See Passive Anti-Theft System
(page 70).
2. Switch the ignition on.
3. Access the main menu on the information
display controls. Use the arrow keys to
get to the following menu selections:
Action and Description
Programming/Changing Configurable
Settings
Use the information display to access your
configurable MyKey settings.
1. Switch the ignition on using an admin key
or remote control.