Basic Functions; Switching The System On; Switching The System To Eco Power Standby Mode; Power-Saving Automatic Standby - Philips MCD515/12 User Manual

Switching the system on

●
Press ECO POWER/STANDBY-ON B (B
on the remote).
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press SOURCE repeatedly (or DISC,
TUNER, TAPE or AUX on the remote).
➜
The system will switch to the selected source.
Switching the system to Eco
Power Standby mode
●
Press ECO POWER/STANDBY-ON B in
the active mode.
➜
The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
●
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
●
If the system is normal standby with clock display,
press and hold ECO POWER/STANDBY-
ON Bfor 3 seconds or more to switch to Eco
power standby or vice versa.

Power-saving automatic standby

As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.

Sound Control

●
Press DSC repeatedly to select the desired
sound effect: FLAT, CLASSIC, JAZZ, POP or
ROCK.
●
Press DBB/INCREDIBLE SURROUND on
the system to switch on or off the surround
sound effect or bass enhancement.
●
You can also press DBB or IS on the remote to
turn on or off the DBB or IS function
respectively.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.

Basic Functions

Volume control

Turn the VOLUME control on the front panel
clockwise or anticlockwise or press VOL +/- on
the remote to increase or decrease the volume
level.
➜ "VOLUME XX" is displayed on the display
panel. "XX" denotes the volume level.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the top of the back side of the DVD player.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTE" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
23