Using An Accessory Rf Modulator; Step 5: Connecting The Power Cord; Optional: Connecting Additional Equipment - Philips MCD515/12 User Manual

Connections

Using an accessory RF modulator

IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labelled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
RF coaxial cable to TV
2
ANT IN TO TV
Antenna or
Cable TV signal
1
Use the composite cable (yellow) to connect the
system's VIDEO OUT jack to the video input
jack on the RF modulator.
2
Use an RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.
16
Back of RF Modulator
(example only)
VIDEO AUDIO IN
IN
R L
CH3 CH4
S-VIDEO
IN
AUDIO TV IN
IN
VIDEO IN
1
Step 5: Connecting the power
cord
IMPORTANT!
– Never make or change any connection
with the power switched on.
After everything is connected properly, plug in
the AC power cord to the power outlet.
Optional: Connecting additional
equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
AUDIO OUT
L
R
A
AUDIO
INPUT
B
DIGITAL DIGITAL
OUT OUT
LINE OUT LINE OUT
R R L L
R L
MW AN
AUX/
CDR IN
SUB
WOOFER OUT
+
R
L
+
SPEAKERS 8Ω