Step 2: Connecting speakers
1
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-". Fully inser t
the stripped portion of the speaker wire into the
terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Step 3: Antenna connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
MW
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
14
2
●
FM Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– Connect the DVD system directly to
the TV.
– A SCART connection will let you use
features both Audio and Video on the
DVD Player.
Using SCART jack
S-VIDEO
IN
AUDIO
IN
TV IN
VIDEO IN
DIGITAL
DIGITAL
OUT
OUT
LINE OUT
LINE OUT
R
R
L
L
R
L
MW ANTENNA
FM ANTENNA
S-VIDEO
IN
AUDIO
TV IN
IN
VIDEO IN