Using S-Video In Jack; Using An Accessory Rf Modulator - Philips MCD510/25 User Manual

Connections

Using S-Video In jack

IMPORTANT!
– If the picture is distorted, check the
Video Output setting. Make sure it is set
to 'S-Video'. (See Setting video
preference).
S-VIDEO
IN
AUDIO TV IN
IN
VIDEO IN
1
SCART OUT
DIGITAL
OUT
LINE OUT
R L
FM 75Ω
1
Use the S-Video cable (not supplied) to connect
the system's S-VIDEO OUT jack to the S-
Video input jack (or labeled as Y/C or S-VHS) on
the TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
14
S-VIDEO
IN
AUDIO
TV IN
IN
VIDEO IN
2
S-VIDEO OUT
VIDEO OUT
FM/MW ANTENNA

Using an accessory RF modulator

IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
RF coaxial cable to TV
2
ANT IN TO TV
Antenna or
Cable TV signal
SCART OUT
●
Use the composite cable (yellow) to connect
the system's CVBS jack to the video input jack
on the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.
Back of RF Modulator
(example only)
VIDEO AUDIO IN
IN R L
CH3 CH4
1
S-VIDEO OUT
VIDEO OUT