phaiser TECTON BHS-530 User Manual page 9

Additional Pairing Notes
1. If asked for the Pass/PIN code, please
enter "0000". Newer phones don't require
this.
2. The headset will automatically turn off if
not paired within 5 minutes.
Manual Pairing, Pairing with a
second device or Re-Pairing:
1. Simultaneously press and hold the Minus
and the Middle Control Buttons on the
control-unit for 3 seconds while the head-
set is turned On. You will hear the audio
message "Disconnected" (The original
connection will be lost while in pairing
mode).
2. Search the Bluetooth menu of your
device for "BHS-730" and complete above
regular pairing steps until successfully
connected.
3. To delete all pairings from the headset,
press and hold the Minus and the Middle
Control Buttons on the control-unit for
more than 10 seconds until you hear the
double low tone confirmation.
9