HOW TO CONNECT? Press and hold the Middle control but- ton for about 5s. As soon as you hear the „Power On“ message and the LED indicator turns blue, go to the Blue- tooth menu of your phone. Search for new Bluetooth devices and select „BHS-790“.
HOW TO CHARGE? Although the headphones come with a partially charged battery, it is recommended that you fully charge your BHS-790 before first use. Open the charging port cover with your fingernail and connect the USB charging cable. The LED indicator will turn red while charging.
Page 7
HOW TO MAKE THEM FIT? Make sure you hear the great HD Sound of your BHS-790. Everyone’s ears are different, be sure to try all sizes of eartips to find the perfect one for you. Push the earbuds into your ear gently to get a good seal.
Page 8
HOW TO WEAR FOAMTIPS? 1. Squeeze down the foam tip and roll the tip into a thin, round cylinder. 2. Pull back and up on ear to open the canal. Gently insert the entire tip into the ear. 3. Hold the tip in place until it expands.
Page 9
HOW TO USE THE WINGS? When you put the buds into your ears, the pointy end of the wing needs to point forward, towards your face. Hook the wing into your ear so it can get a grip and adjust it to find the most comfortable position.
Page 10
HOW TO MANAGE THE CABLE? In order to prevent the cable from dangling, use the included cable ma- nagement clips to tighten the cable behind your head. Insert the cable into your preferred cable management clips as illustrated below and carefully tighten until the cable fits comfortably behind your head.
HOW TO CHECK THE BATTERY LEVEL? Every time you turn the headphones on, you will hear the battery status notification. If the headphones are already turned on, you can trigger the battery status notification manually by briefly pressing “ � ” and “ � ” at the same time.