phaiser TECTON BHS-530 User Manual page 13

by pressing and holding Minus and Middle
control buttons at the same time for 3
seconds.
ON / OFF-Function
Keep the middle button on the control unit
pressed until you hear the audio message
"Power On". You will see the LED turn Blue
for a short time, then the LED will turn off if
automatically reconnected to your phone or
stay blue while in pairing mode.
To turn off the headset, press and hold the
middle button on the control unit again until
you hear the "Power Off" message. The in-
dicator LED on the control unit will turn Red
and then shut off.
If you leave your earbuds powered On and
walk away from them until they disconnect,
they will automatically power down after 5
minutes.
13