Avid Technology ISIS 1000 Quick Start

Thank you for purchasing an ISIS | 1000. This Quick Start guide provides an overview of the steps required to get your

ISIS | 1000 up and running as quickly as possible.

For detailed instructions or clarifications on the steps outlined in this document, see the Avid ISIS | 1000 Setup Guide,

available in the software kit or via download at www.avid.com/support. Click the link titled Knowledge Base and search

for ISIS | 1000 Setup Guide.

This Quick Start describes creating a configuration with a single ISIS | 1000. To create a multi-ISIS system, see the Setup

Guide.

Unpack the Shipping Box and Verify Contents

What's included with your ISIS | 1000:

ISIS | 1000 Engine including Storage Controller,

2 power supplies, Media Pack (10 HDDs),

and 2 system drives (SSDs)

Health and Safety information, EULA

Before you can start using your new ISIS | 1000, you must register your system and upgrade the pre-loaded software at

www.avid.com/activationcard.

You must register your product before you can download and install the ISIS software.

You can use an existing support login or create a new account if you do not have one.

Each ISIS | 1000 must be registered separately using the unique serial number printed on the labels on the Engine

chassis and the shipping box.

After you register each ISIS | 1000, the software will be accessible through www.avid.com/account. Download the

software to a computer that can be connected to the ISIS | 1000 in a later step.

Avid

ISIS | 1000 Quick Start

Bezel

2 Power cables

Rack Mounting Kit (may include

other hardware and tools)

2 QSFP adapters

Table of Contents

Do you have a question about the ISIS 1000 and is the answer not in the manual?

Page 1 Download the Software After you register each ISIS | 1000, the software will be accessible through www.avid.com/account. Download the software to a computer that can be connected to the ISIS | 1000 in a later step. Copyright 2015 Avid Technology, Inc.
Page 2 IP address: 169.254.10.20 Netmask: 255.255.255.0 For more detail, see page 27, Configuring the Computer’s IP Address, in the ISIS 1000 Setup Guide. Open a browser and enter the following URL: https://169.254.10.10:5015 Enter the password: se-admin. Enter the following required information:...
Page 3 Install the software. On the first system you are configuring, make sure to check the box next to Run System Director. For more information, see page 29, Installing the Software and Setting up the ISIS System, in the ISIS 1000 Setup Guide.
Page 4 Click Create File System. Click Home, then Media Packs. Select all the Media Packs, then click Bind. Copyright 2015 Avid Technology, Inc.
Page 5 Console) for detailed instructions on configuring the storage for users. See the Client Guide (also available in the Help link) to install the ISIS Client software and connect users to the ISIS. Congratulations: Your ISIS is ready to use! Copyright 2015 Avid Technology, Inc.