Table of Contents
Advertisement
Quick Links
Universal 3G GSM Gateway
Installation Guide
Ref no. 452 856 (GB) Version 2
Product Part No. 452 003/AU
LED
The Universal 3G GSM gateway has 2 LEDs that indicate the device status
LED
STATUS
OFF
ON
Status
Slow Blinking
Fast Blinking
OFF
Slow Blinking
GSM
ON
Fast Blinking
3G GSM Gateway
DESCRIPTION
Device turned OFF
Device ON and Backup Battery Charging
Device powered by Battery Backup
Backup Battery NOT present (or not connected)
GSM Network Searching, Low GSM Signal Level, SIM card not present, PIN not inserted
Good GSM Signal Level
Very Good GSM Signal Level
Roaming Services
RCM (Regulatory Compliance Mark)
Advertisement
Table of Contents
Related Manuals for AVIRE 452 003/AU
Summary of Contents for AVIRE 452 003/AU
-
Page 1: Installation Guide
Universal 3G GSM Gateway Installation Guide Ref no. 452 856 (GB) Version 2 Product Part No. 452 003/AU The Universal 3G GSM gateway has 2 LEDs that indicate the device status 3G GSM Gateway STATUS DESCRIPTION Device turned OFF Device ON and Backup Battery Charging... -
Page 2: Installation
CONNECTIONS CONNECTOR DESCRIPTION Power supply connector USB connector for upgrades TEL1/TEL2 RJ11 FXS connectors Antenna SMA/f connector for external GSM antenna SIM connector Switch Switch for the device power off-on INSTALLATION Location: It is recommended that the device be installed at the highest point (e.g. -
Page 3: Replacing The Battery
C100 is supplied with certain standard factory programming settings, specifically tailored for the Australia and New Zealand lift industries (see www.avire-global.com/AU/ for more details). One of these default setting is ‘GSM Status’, see below for the relevant section of the C100 programming menu: HW Monitoring >... -
Page 4: Command Description
SMS Remote Configuration and Management of the Universal 3G GSM If using the Universal 3G GSM with an emergency telephone other than the C100, the GSM can be configured remotely and send status information via SMS to a list of authorised users. Two types of authorised user profile can be configured: •... -
Page 5: Configuration Check
Configuration check To check configuration, send the following message to the Universal GSM: Provided the sender is an authorised number then the following example will be received: 3#*1#3GLIFT#+447987654321,+447123456789#+447987654321,+447123456789 Low battery warning setup The Universal GSM can be configured to send warning messages if the backup battery is running low. There are two battery warning messages: A low battery message is sent when the battery has >= 60 minutes capacity. -
Page 6: Low Battery Warning Messages
After the reception of the message, the device answers with an ACK message then will re-boot. DECLARATION OF CONFORMITY The Avire Universal 3G GSM, part number 452 003/AU, conforms to the requirements of the standards listed below. Regulatory Compliance Mark CE Mark 1999/5/EC 9th March 1999, R&TTE... - Page 7 Autotest SMS: Receiver 3 Recipient 3 of autotest SMS Separator Autotest SMS: Receiver 4 Recipient 4 of autotest SMS Avire Global Pte Ltd Unit 16, 69-73 O’Riordan Street +61 (2) 9669 1102 P O Box 6414 +61 (2) 9693 1137 Alexandria sales.au@avire-global.com...