ALGO
Connecting Input Devices to 8188
The input relay to the 8188 SIP Ceiling Speaker can be prompted by
any normally open, normally closed switch, Algo 1202 Call Button, or
Algo 1203 Call Switch. The input switches can be connected to the
back of the back of the 8188 via a Terminal Block on the "Relay SW
Input" pair.
1202 Call Button: A pair of wires from the
terminal block on the back of the 8188 can
connect to the centre pair of the modular
connector at the back of the Call Button.
1203 Call Switch: A pair of wires can be run
from the back of the device via a screw output
connector to the 8188 via the screw input
connector.
Document 90-00068
2017-03-28
Page 19
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker
(604) 454-3792
support@algosolutions.com