2-4. Assembly
1
1) LCD PBA
3
①
1) Remove the release papers as shown in
Figure ① . (3 points)
2) Check correspondence of 4 points after
assembling LCD to PBA as shown in Figure ② . 1) Solder LCD BACKLIGHT FPCB.
②
Check
correspondence of
4 points.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Correspond the LCD module FPCB to guide
holes.
2) Solder the LCD PBA and LCD FPCB together.
3) Attach the protection tape on LCD FPCB
soldering.
4
2-7
Main Electrical Parts List
①
②
③