Nikon Coolpix W100 Quick Start Manual page 13

5
Check the authentication
code.
After checking that the camera
and smart device display the
same six-digit authentication
code, and then follow the
steps below (note that the
code may not be displayed in
some versions of iOS, but you should follow the steps below
even if the code is not displayed).
- On the camera, press O.
- On the smart device, tap Pairing (the name of the button
may be different depending on the smart device).
6
Press A when the dialog at
right is displayed.
If the camera displays Could
not connect., press
R Reconnect to return to
step 4. To cancel pairing
settings, press SCancel.
7
Select whether to add
shooting location
information to the images
that you take.
To add location data to images,
select RYes. Turn on the
location data features in the SnapBridge app and on the smart
device (for more information, see the instructions included with
the smart device).
Auth. code
000000
Confirm that the same
authentication code is
displayed on the smart
device and press OK.
Camera
Your camera and smart device are
connected!
SnapBridge will send your photos to
your smart device as they are taken.
Download location
data from smart
device?
Yes
No
Get Ready
13