Table of Contents
Advertisement
Selecting surround sound
G
Press SURR on the remote to select :
MULTI-CHANNEL or STEREO.
➜
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜
The center and rear speakers operate
only in Multi-channel surround mode.
➜
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theater Systems) Surround and
Dolby Pro Logic II.
➜
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the rear speakers.
Helpful Hints:
– You are not able to select the surround
sound mode if the system setup menu is
turned on.
001-053-hts5500-37-Eng47
Sound and Volume Controls
G
G
G
45
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc's content or that
optimizes the sound of the musical style
you are playing.
Press SOUND to select the available
sound effect.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ
(except for DivX/MP3).
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
– Sound effect is not active during line-out
connection.
Volume control
Adjust VOLUME control (or press
VOL +/- on the remote) to increase
or decrease the volume level.
➜
"VOL MIN" is the minimum volume
level and "VOL MAX" is the maximum
volume level.
To turn off the volume temporarily
Press MUTE on the remote.
➜
Playback will continue without sound
and "MUTE" appears.
➜
To restore the volume, press MUTE
again, or increase/decrease the volume
level.
13/04/05, 4:15 PM
3139 115 14781
(continued)
45
Advertisement
Table of Contents
