Picture Setting; Setting The Video Output - Philips HTS5310S/51 User Manual

DVD Setup Menu Options

Picture Setting

This DVD system provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In 'Video Setup Page', use 34 keys to
highlight { Picture Setting }, then press
2.
{ Standard }
Select this for original colour setting.
{ Bright }
Select this for vibrant colour setting.
{ Soft }
Select this for warm colour setting.
{ Personal }
Select this to personalise your picture colour
by adjusting the brightness, contrast, tint and
colour (saturation).
2
Use 34 keys to select a setting and press
OK to confirm.
3
If you select { Personal }, then proceed
4 7
to steps ~ .
➜
The 'Personal picture setup' menu
appears.
Personal Picture Setup
Brightness
Contrast
Tint
Color
4
Use 34 keys to highlight one of the
following options.
{ Brightness }
Increase this value to brighten the picture
colour or vice versa. Choose zero (0) for the
average setting.
{ Contrast }
Increase this value to sharpen the picture
colour or vice versa. Choose zero (0) to
balance the contrast.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
36
(continued)
{ Tint }
Increase or decrease this value to change the
colour phase of the picture. Choose zero (0)
for the average setting.
{ Color }
Increase this value to enhance the picture
colour or vice versa. Choose zero (0) to
balance the colour.
5
Use 1 2 keys to adjust the setting that
best suit your personal preference.
6
4 5
Repeat steps ~ to adjust other
settings.
7
Press OK to confirm.

Setting the Video Output

Choose the type of video output that
matches the video connection between
the DVD system and your TV.
1
In 'Video Setup Page', use 34 keys to
highlight { Component }, then press 2.
{ YUV }
Select this if you have connected the DVD
system to your TV using component video
sockets (Y Pb Pr).
{ RGB }
Select this if you have connected the DVD
system to your TV using scart socket. The
factory default setting is RGB.
2
Use 34 keys to select a setting and press
OK to confirm.
Helpful Hint:
– You do not need to adjust the video output
setting if you are using VIDEO (yellow) or
S-VIDEO video connection.