Accessing Audio Setup Page; Speakers Volume/Speakers Delay; Night Mode - Turning On/Off; Cd Upsampling - Philips HTS5310S/51 User Manual

DVD Setup Menu Options

Accessing Audio Setup Page

1
Press DISC and followed by SETUP on
the remote.
2
Use 1 2 keys to select 'Audio Setup
Page'.
3
Press OK to confirm.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode

CD Upsampling

Speakers Volume/Speakers Delay

These menus contain speaker setup
options that allow you to adjust the
individual speakers volume and distance.
For details, see page 42.

Night Mode - turning on/off

When the night mode is activated, the
high volume outputs are softened and
low volume outputs are brought upward
to an audible level. It is useful for
watching action movies without
disturbing others at night.
1
In 'Audio Setup Page', use 34 keys to
highlight { Night Mode }, then press 2.
{ On }
Select this to level out the volume.
{ Off }
Select this when you want to enjoy the
surround sound with its full dynamic range.
2
Use 34 keys to select a setting and press
OK to confirm.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
34
(continued)
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
Make sure that the DVD system is in
Stereo mode in order to access the
CD upsampling option.
1
In 'Audio Setup Page', use 34 keys to
highlight { CD Upsampling }, then press
2.
{ Off }
Select this to disable CD-upsampling.
{ 88.2 kHz (X2) }
Select this to convert the sampling rate of the
CDs twice higher than the original.
2
Use 34 keys to select a setting and press
OK to confirm.
Helpful Hint:
– If you press SURR button on the remote
control to select "Multi-Channel" mode, it will
disable the CD upsampling feature.