Content How to understand the instruction manual ............ 3 Markings on the device ..................3 Markings in this manual ..................3 Important safety notes .................. 3 Unpack and check the device ................. 5 Overview about the parts ................5 Quick-start guide ................... 6 Preparation for operation ................
Thank you very much for your confidence. We wish you much pleasure and success with your new device. The walimex Daylight Set is a continuous light, which is especially developed for ambitious beginners and professional users in film and studio photography.
Page 4
WARNING Danger of crashing, entrapment and fire through the falling down of the device The weight of the device is approx. 0,5kg. − Make sure, that the device is always positioned tilt and skid resistant and stored securely. − Avoid placing cables where they can be tripped over. The device could be overturned. WARNING Danger of electric shock, burn hazard Please note, that the device is still connected with the supply voltage even if it is switched off.
− Don´t touch the parts during operation and cooling down. − Please cool down your device completely before starting any mounting or maintenance arrangements. WARNING Danger of cutting and splitting through breaking lamps, possible discolouration on the lamps Lamps can break and split, when they fall down. Even small residues of skin oil on the lamps could lead, due to the high heat impact, to the splitting of the lamp.
Quick-start guide ADVICE: The detailed instruction for the following operations can be found in the respective chapters in this instruction manual. Keep the sequences of the following operation steps when using the device for the first time to avoid damages on the device. WARNING Please note the safety notes in the respective chapters throughout operation.
• Screw out lamps: Screw out the lamps carefully and store them securely. Connect to power supply • Switch off device. See Switch the device on and off. • Compare the local power supply with the connected load of the device. See Technical Specifications.
Problem Possible reason Remedy function Lamps do not light Lamps are switched off Switch on lamps, see Switch lamps on and Lamps are defect Change lamps, see Screw lamps in and out 10. Maintenance 10.1 Continuous inspections Before every What you should do? operation Check all cables and plugs for damages In case of damage:...
You can find extensive accessories for your device in our webshop. 12. Spare parts Part of the device Item number Lamps (walimex Spiral Daylight Lamps 25 W) 12803 13. Disposal and environment protection Your device should be disposed free of charge at the local disposal points.