Content How to understand the instruction manual ............ 4 Markings on the device ..................4 Markings in this manual ..................4 Important safety notes .................. 4 Unpack and check the device ................. 4 Overview about the parts ................6 Quick-start guide ................... 7 Preparation for operation ................
Page 3
Thank you very much for your confidence. We wish you much pleasure and success with your new device. The Fluorescent Light is equipped with high-quality lamps and therewith particularly suitable for ambitious beginners and professional users in film and studio photography. The lamps are characterized by their long life, stable colour temperature and constant luminance (without flickering).
How to understand the instruction manual Markings on the device This marking mean, that your device meets the safety requirements of all relevant European Directives. This marking mean, that your device should be disposed in the local disposal points. Dieses Zeichen bedeutet, dass Sie das Gerät nur bei einer örtlichen Markings in this manual Marking...
Page 5
WARNING Danger of electric shock, burn hazard A short-circuit could be caused by defect cables, humidity or moisture. A short-circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire. Please just use the original cables, which are included in delivery.
Please just use lamps, which comply with EN 60357 Page 3155. Unpack and check the device Please unpack the delivery carefully. Please check, if the delivery is complete: 1 x Fluorescent Light 220 W o Lamps (number depends on model – see technical data) o 1 x Power Cable o 1x Mounting Bracket/Lamp base 1 x Instruction Manual in German and English.
Housing Lamp Socket Locking Lever Tilt Angle Jack for Power Connection On/Off Switch Lamps On/Off Switch Fuse Holder Lamps Barndoors Quick-start guide ADVICE: The detailed instruction for the following operations can be found in the respective chapters in this instruction manual. Keep the sequences of the following operation steps when using the device for the first time to avoid damages on the device.
Preparation for operation Mount on lamp tripod ADVICE: Please note the user information of the tripod manufacturer. WARNING Select a tripod of suitable weight and dimensions. See Technical specifications. Make sure, that the tripod with the mounted device has a tilt and skid resistant stand. Loose locking knurl.
Operation of the device WARNING Make sure, that the lamp tripod is positioned tilt and skid resistant. Adjust tilt angle Open tilt lever. Adjust the required tilt angle. Tighten tilt lever. Switch the device on and off Switch on device: Set main On/Off tappet switch on I.
Solve Problems Problem Possible reason Remedy Device is switched on, Power cord is not plugged Plug in the power cord correctly but has no function or plugged incorrect Micro-fuse is defect Change micro-fuse, see Change micro- fuse Lamps do not light up Lamps are switched off Switch on lamps, see Screw in and out of lamps...
Slide the fuse holder carefully into the slot as far as it goes. 11. Accessories and options You can find extensive accessories for your device in our webshop. 12. Spare parts Part of the device Item number Lamp (walimex Replacement Lamp Fluorescent Light) 2G11 / 55W 14532 Power Cord 12914...