Content How to understand this instruction manual ............ 4 Markings on the device ..................4 Markings in this manual ..................4 Important safety notes .................. 4 Unpack and check the device ................. 6 Overview about the parts ................6 Quick-start guide ................... 7 Preparation for operation ................
Page 3
Thank you very much for your confidence. We wish you much success and pleasure with your new device. The little details bring the big picture! With the Ready-To-Go Light Cube no problem at all, because the mobile miracle cube combines 540W bright light with a sturdy exterior on compact 60x60cm. Use this trump in product photography and create ingenious results, e.g.
How to understand this instruction manual Markings on the device This marking mean, that your device meets the safety requirements of all relevant European Directives. This marking mean, that your device should be disposed in the local disposal points. Markings in this manual Marking Meaning Indicates the handling and consequences of safety...
Page 5
WARNING Danger of electric shock, fire through short-circuit A short-circuit could be caused through defect cables and through humidity or moisture. A short- circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire.
Please just use lamps, which comply with EN 60357 Page 3155. Unpack and check the device Please unpack your device carefully. Please check, if the delivery is complete: 1x Ready-To-Go Light Cube 540W o 3x Cloth Background (blue, white, grey) o 1x Silver Cloth o 1x Power Cord o 2x Diffusor...
Quick-start guide ADVICE: The detailed instruction for the following operations can be found in the respective chapters in this instruction manual. Keep the sequences of the following operation steps when using the device for the first time to avoid damages on the device. WARNING Please note the safety notes in the respective chapters throughout operation.
You can open/close the upper and front camera opening with the Velcro fastener or the zipper according to your requirements. ADVICE: We recommend using a walimex tripod as to achieve optimal pictures. Switch the device on and off Switch on device: Set main On/Off switch on I.
Switch lamps on and off You can switch the lamps on and off through the On/Off tappet switch. Switch on device: See Switch the device on and off. Switch lamps on: See Switch the device on and off. The lamp lights up. Switch lamps off: See Switch the device on and off.
Before With every What you should do? every change operation Check, if the lamps are screwed in firmly. In case of damage: WARNING! Danger of electric shock and fire through short- circuit. The device should be repaired by an electrician immediately.
11. Accessories and options You can find extensive accessories for your device in our webshop. 12. Spare parts Part of the device Item number Lamp (walimex Replacement Spiral Lamp) 16440 Power Cord 12914 13. Disposal and environment protection Your device should be disposed free of charge at the local disposal points.