Sharp sh906i Before Using page 26

3
Place the FOMA terminal into the desktop holder.
Charge start sound is heard, Charging LED
illuminates, and charging starts.
Keeping the connector parallel with the desktop holder as
shown below, firmly push it all the way in until it clicks.
Do not open the FOMA terminal with the terminal placed in the
desktop holder.
Charging/Called LED
1
Connector
(Face the side with the arrows up)
2
100 VAC outlet
4
When Charge end sound is heard and charging
LED turns off, charging is complete.
Hold the desktop holder and lift the FOMA terminal out.
54
3
FOMA AC Adapter 01/02
Making the desktop holder stand up
Make the stand behind the desktop holder stand up so that
charging becomes available with the desktop holder stood up.
Do not force to make the stand behind stand up.
Note
Pull the AC adapter out of the outlet when left unused for a long
period of time.
When Charge start sound is not heard or when charging LED does
not illuminate, check that the FOMA terminal is placed securely in
the desktop holder (except when terminal is turned off, Manner
mode is set or Charge start sound is Silent).
When placing the FOMA terminal in the desktop holder, be careful
that the strap is not caught in between the handset and the
desktop holder.
Battery level
How to check the battery level
"
Battery level is still sufficient.
#
Battery level is low.
Battery is almost empty. Charge the
$
battery.
Battery is empty (Power will turn off
%
soon).
{
Battery pack is being charged.