Yamaha R-N602 Owner's Manual page 23

Connecting to network
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
Cursor keys
6/V/<1/f>
ENTER
SETUP
1
Press
<9
to turn on this unit.
2
Press SETUP.
RETURN
3
Use the cursor keys
(.6.
I V) to select
"Network " and press ENTER.
,,,
~<fl<.
To return to the previous state. press RETURN.
4
Use the cursor keys
(.6.
I V) to select
"Connection" and press ENTER.
5
Use the cursor keys
(.6.
I v) to select
"Wireless" and press ENTER.
6
Use the cursor keys (.6.1 v) to select "Manual
Setting" and press ENTER.
:·~::=:r,:u:=::_
. :::. =:::· ::::· T r\
""' : : : :
.·
·:·
............. .
7
Use the cursor keys
(.6.
I v) to select "SSID"
and press ENTER.
8
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys ( <1/1>) to move the edit position
and the cursor keys
(.6./\7)
to select a character.
18
En
9
Use the cursor keys
(.6.
I v) to select
"Security" and press ENTER.
1 0
Use the cursor keys (<Ill>) to select desired
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
If you select "None", the connection may be insecure since the
communication is not encrypted.
11
Use the cursor keys
(.6.
I V) to select
"Security Key" and press ENTER.
12
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
Use the cursor keys (<Ill>) to move the edit position
and the cursor keys
(.6./\7)
to select a character.
You can insert I delete a character, by pressing
PRESET) (insert) or PRESET< (delete).
13
Use the cursor keys
(.6.
I V) to select
"Connect[ENTER]" and press ENTER to save
the setting.
If"ERROR" appears, check the SSID and security
key on the wireless router (access point) and repeat
from Step 7.
If"ERROR" not appears, a connection is success .
Verify whether the unit is connected to a wireless
network (p. 20).
14
To exit from the menu, press SETUP.