Table of Contents
Advertisement
DVD Setup Menu Options
Video Setup Page
TV Type
TV Display
Progressive
36
(underlined options are the factory default settings)
Selects the colour system that matches the connected TV. It will
enable playback of a different type of disc (PAL or NTSC disc) on
this DVD system.
{ PAL }
– For PAL-system TV.
{ NTSC }
– For NTSC-system TV.
{ Multi }
– For TV that is compatible with both PAL and
NTSC.
The picture shape can be adjusted to fi t your TV.
{ 4:3 Letter Box } – For a 'wide-screen' display
with black bars on the top and
bottom.
{ 4:3 Pan Scan } – For a full-height picture with the
sides trimmed.
{ 16:9 Wide Screen } – For wide-screen TV
(frame ratio 16:9).
Before enabling the progressive scan feature, you must ensure that
your TV can accept progressive signals (a progressive scan TV is
required) and that you have connected this DVD system to your
TV using the Y Pb Pr (see 'Option 2: Connecting to a Progressive
Scan TV or component video input').
{
}
– Turns on progressive scan mode.
On
Read the instructions on the TV and confi rm
your action by pressing OK on the remote
control.
{
}
– Disables the progressive scan mode.
Off
Note: If no picture appears, wait for 15 seconds for auto recovery.
Otherwise, turn off the progressive scan as below:
1) Press OPEN CLOSE to open the disc tray.
2) Press
on the remote control.
3) Press MUTE on the remote control.
(continued)
Advertisement
Table of Contents
Troubleshooting
