Accessibility
2
MbN: "Boost speech on" or "Boost speech off" a
MSELECTN
R The selected setting is applied immediately and is also used for
Key tones
Use this procedure to change the volume of the tones that sound when
you press keys on the handset, or to turn them off. The default setting is
"Low". Includes confirmation tones and error tones, etc. This feature can
be set for each unit.
1
For handset: MMENUN#165
2
MbN: Select the desired setting. a MSAVEN a MOFFN
Message indicator
The message indicator on the handset can indicate unit status, as
explained below.
Indicator
Flashing rapidly
Flashing slowly
Setting the message indicator
You can enable and disable the message indicator for each type of
status.
– "Incoming call" (default: On)
– "New message" (default: On)
– "New VM" (default: On)
– "Missed call" (default: Off)
18
TGMA44_45(en)_0606_ver101.pdf 18
future calls.
Status
– Outside call or intercom call is being received
or on hold.
– The handset alarm is sounding.
– There are new messages.
– There are new voicemails.
– There are missed calls.
For assistance, please visit http://shop.panasonic.com/support
2016/06/06 16:11:27