Voice-Activated Dialling - Gigaset SL1 User Manual

Gigaset SL1 colour / englisch / A31008-M1570-R211-1-QF19 / start_guide_time.fm / 16.04.2004
Sending a single entry or complete list to a handset
You can send individual entries or the entire list to another Gigaset SL1 colour, S1, S1
colour or C2 handset or a Comfort handset in the Gigaset 4000, 3000 or 2000 series that
is registered to the same base. Stored voice patterns and speed dial numbers are not
sent. The VIP settings are sent depending on the handset.
s or C (open directory/speed dial list); s (select entry);
v (open menu); s
~
(enter the internal number of the receiving handset);
You can select further entries provided you confirm with the display key
have sent an entry. Select

Voice-activated dialling

With voice-activated dialling, you dial simply by speaking the name of the person you
wish to call. To do this, you must first store a voice pattern, i.e. the name which you
speak will be stored in the handset.
Up to four users can store/record a voice pattern per entry. Before he records a voice
pattern, the user must "identify" himself, e.g. as User 2.
A maximum of 23 voice patterns can be stored for directory entries. An entry stored
with a voice pattern is indicated by ´ in the voice directory.
Recording a voice pattern for an existing directory entry
Record your voice pattern in quiet surroundings (holding the handset about 25 cm
away).
Step 1: Open the directory for voice-activated dialling:
s (open directory); s(select entry);
Step 2: Begin recording:
; (Confirm the display prompt). Speak the name when prompted to do so by
OK
record
the display. Repeat the name when prompted again to do so. Your recording is stored
automatically.
Press a and hold (return to idle status).
A message tells you if your speech pattern is too much like another user's. Close this
message with
repeat the recording.
Using voice-activated dialling: Press t and hold and speak the name.
Phone announces the caller's name
When you receive an external call, you hear the ringer and the telephone announces the
caller's name.
Preconditions: Calling Line Identification. A voice pattern is stored (page 15).
Activating/deactivating the name announcement
v (open menu); s
2x s (to the next-but-one line); activate/deactivate r (Announce);
press a and hold (return to idle status).
OK
Copy Entry
to stop sending.
No
Ý
, go back to the start of the voice pattern recording sequence and
ê
; s
OK Ringer Settings
Using the directory and other lists
or s
);
OK
Copy List
OK
; s
(example)
View User 2
;
OK
Ext. Calls
.
after you
Yes
.
OK
;
OK
;
Save
15