Option 2: Connecting To A Progressive Scan Tv Or Component Video Input; Step 4 : Connecting The Fm/Am Antennas - Philips HTS3090 User Manual

Basic Connections
Option 2: Connecting to a
Progressive Scan TV or component
video input
The progressive scan video quality is
only available when using Y Pb Pr
connection and a progressive scan TV is
required. It provides superior picture
quality when watching DVD movies.
A
Follow option 1 to make the basic video
connection.
B
Use the component video cables (red/
blue/green - not supplied) to connect the
Y P P jacks on the DVD system to
B R
the corresponding component video
input jacks (or labeled as Y Pb/Cb Pr/Cr
or YUV) on the TV.
C
If your TV accepts progressive signals,
proceed to 'Getting Started - Step 5:
Setting up Progressive Scan feature' for
detailed progressive feature setup.
Helpful Hint:
– If your TV does not support Progressive
Scan, you will not be able to view the
picture. Press and hold OPEN/CLOSE
button, and press '1' to deactivate
progressive scan.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
(continued)
fi x the claw
into the slot
Option 2
Step 4: Connecting the FM/
AM antennas
A
Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf, or attach it to a stand
or wall.
B
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fi x
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
AM loop antenna
FM wire
antenna