Step 4: Connecting The Fm And Am/Mw Antennas; Step 5: Connecting The Power Cord - Philips HTS3000/55 User Manual

Basic Connections
fi x the claw
into the slot
AM/MW
antenna
1
Step 4: Connecting the
FM and AM/MW
antennas
A
Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
B
Connect the supplied FM antenna to the
FM 75 socket. Extend the FM antenna
Ω
and fi x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
16
(continued)
FM
antenna
2
AM/
MW
SPEAKERS
Step 5: Connecting the
power cord
Notes:
– For power supply rating, refer to the
rear or bottom of the main unit.
– Turning off to standby mode does not
disconnect the unit from mains.
Connect the AC power cord to the
power outlet.
The standby LED on the main unit
lights up.
Helpful Hint:
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
AM/
MW