Maintenance ............7 Stool Components ..........3 Accessories & Service Parts .........7 Cleaning ..............3 Troubleshooting .............8 Assembly Instructions ...........4 The Brewer Company, LLC N88 W13901 Main Street, Suite 100 Menomonee Falls, WI 53051 P 1.888.Brewer.1 F 262.251.2332 www.brewercompany.com Document 99958 rev B...
Order number SAFETY INFORMATION Safety Information The primary concern of The Brewer Company is that the stool is operated and maintained with the safety of the patient and health care staff in mind. To ensure safe and reliable operation: •...
ASSEMBLY INSTRUCTIONS 1. Remove the body support (if equipped), the backrest, and the stool from the box, and set aside (Fig. 1 and 2). Fig. 1 Fig. 2 2. On the backrest, remove the screws and lock washers from the holes at the bottom of the backrest (Fig.
STOOL ADJUSTMENTS Seat Height To adjust the seat height downward, sit on the chair and lift the lever under the seat side edge (Fig. 6). To raise the seat height, remove your weight from the seat and lift the lever under the seat side edge. Release the lever at the desired seat height. For maximum comfort, your chair seat should be adjusted so that your hands rest comfortably on your work surface.
STOOL ADJUSTMENTS Back Tilt (9500 Series only) Lift and hold the back left lever to release the backrest from its locked position (Fig. 11). Adjust the backrest angle by bending your back in the desired direction. Push the paddle down to lock. If you prefer, the backrest can remain unlocked by leaving the paddle up.
MAINTENANCE Seat Screws Periodically check seat screws (Fig. 15) for tightness. Tighten with Phillips screwdriver if loose. Casters Inspect casters for cracked, chipped, loose or missing wheels. Casters should roll freely. Note: Optional non-pressure locking casters must have weight applied to roll.