2. Hold the threshold switch down while re-powering. Wait for a "C" or a threshold number
to appear in the status window.
3. Follow the setup procedures described in
6 MAINTENANCE
Maintenance requirements of the redundant amplifier switch are minimal, consisting merely of
periodic cleaning.
6.1
Preventive Maintenance
The outside of the redundant amplifier switch should be cleaned during routine headend
equipment maintenance.
6.2
Fuse Replacement
Caution: For continued safe operation and to reduce the risk of fire, replace fuses with the same
type and rating
ADCP-61-813 • Issue 2 • February 2005
Section
5.
© 2005, ADC Telecommunications, Inc.
Page 13