Kreg KHI-SLIDE-INT Owner's Manual page 6

5
ATTENTION When clamping the Brackets to the side of the cabinet, make sure the clamp pad bears on the
Bracket ribs, not the webbing between the ribs, including the web area with the Kreg logo. Clamping with the
clamp pad on the webbing could crack the Bracket.
MOUNTING DRAWER-SLIDE CABINET MEMBERS
All Drawer Slides
Position the Brackets
• Mark the locations of the bottoms of the
drawer slides on the inside faces of the
cabinet.
• Position Bracket A on the right side of the
cabinet, Bracket B on the left side, with
both Brackets extending into the cabinet
and the Bracket Flanges against the front
edges of the cabinet sides.
• Align the top edges of the Brackets with
the drawer-slide location marks and clamp
the Brackets to the cabinet sides.
Fasten the Drawer-Slide Cabinet Members
• Place the drawer slides on the Brackets.
For under-mount slides, place only the
cabinet members of the slides on the
Brackets. For overlay drawer fronts,
follow the drawer-slide manufacturer's
instructions for the slide setback distance
from the front edge of the cabinet side. For
inset drawer fronts, add the thickness of
the drawer front.
• Using the vertical mounting slots in the
drawer-slide cabinet members as guides, drill
pilot holes and screw the slides in place.
• Remove the Brackets from the cabinet.
FRAMELESS CABINETS
Bracket Flange against
cabinet side