Functional Overview; Front And Rear Panels - Philips DVP632 User Manual

Functional Overview

Front and Rear Panels

STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
– Open/Close the disc tray
STANDBY-ON
Mains (AC Power Cord)
– Connect to a standard AC outlet
Audio Out (Left/Right)
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
S-Video Out
– Connect to S-Video input of a TV
CVBS (VIDEO Out)
– Connect to CVBS Video input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
01-36 DVP630_EU_051
– Point the remote control towards this
– Shows the current status of the DVD
OPEN/CLOSE
OPTICAL (Digital audio out)
– Connect to optical AUDIO input of a
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
VIDEO Pb Pr
OUT
L
Y
R
COAXIAL OPTICAL
S-VIDEO
AUDIO OUT
OUT DIGITAL OUT
11
2; PLAY/PAUSE
– To start or interrupt playback
9 STOP
– To stop playback
IR Sensor
sensor
Display
Player
STOP PLAY/PAUSE
RGB
– Connect to RGB input of a TV
digital audio equipment
digital audio equipment
YPbPr
– Connect to YPbPr input of a TV
RGB
/05_8239 210 98393
18/03/2004, 10:04 AM
11