CALIBER B-VENT INSTALLATION INSTRUCTIONS
f i r e - p a r t s . c o m
3. Firestop Spacer/Vent Installation
Frame an opening and install a firestop spacer
whenever the vent penetrates a ceiling/floor area, as
shown in Figure 7. Frame the opening with the same
sized lumber as used in the ceiling/floor joists. Unless
the flue is offset, the hole should be directly above the
appliance. DO NOT pack insulation around the vent.
Assemble vent sections as per manufacturer's
specifications.
09/04
Figure 6
Vertical Termination Vent Lengths
31282 Rev Q
Figure 7
Installing the Firestop Spacer
9