Seasonal Checklist - Heatilator GCDC60 Installation & Operating Instructions Manual

CALIBER B-VENT INSTALLATION INSTRUCTIONS
WARNING!
Children and adults should be alerted to the hazards
of high surface temperatures and should stay away
to avoid burns or clothing ignition. Young children
should be carefully supervised when they are in the
same room as the appliance.
WARNING!
Keep the area near the appliance clear and free from
combustible materials, Gasoline and other flam-
mable vapors and liquids.
Installation and repair should be done by a qualified
f i r e - p a r t s . c o m
service person. The appliance should be inspected
before use and at least annually by a qualified service
person. More frequent cleaning may be required due
to excessive lint from carpeting, bedding material, etc.
It is imperative that control compartments, burners
and circulating air passageways of the appliance be
kept clean.
1. Standing Pilot Ignition Operation
Hearth & Home Technologies recommends you leave the pilot on year round.
a. Lighting the Appliance During Regular Use
Turn the wall switch to "ON".
b. Shutdown During Regular Use
Turn the wall switch to "OFF".
c. Long Term Shutdown
1) Turn all wall switches to "OFF".
2) Turn pilot knob on valve to "OFF".
3) Turn the gas line to "CLOSED".
4) To relight the pilot and appliance, see page 20.
2. Intermittent Pilot Ignition Operation
a. Lighting the Appliance during Regular Use
Turn the wall switch to "ON".
b. Shutdown During Regular Use
Turn the wall switch to "OFF".
c. Long Term Shutdown
1) Turn all wall switches to "OFF".
2) Turn the gas line to "CLOSED".
3) To relight the appliance, see page 19.
09/04
K. SEASONAL CHECKLIST
CAUTION:
Any safety screen or guard removed for servicing a
gas appliance must be replaced prior to operating
the appliance.
Clothing or other flammable material should not be
placed on or near the appliance.
Before operating this appliance, have a
qualified technician:
1. Review proper placement of logs, rock wool
and vermiculite.
2. Check wiring.
3. Check air shutter adjustment.
4. Ensure there are no gas leaks.
5. Ensure the glass is sealed and in proper
position.
6. Ensure the flow of combustion and ventilation
air is not obstructed.
31282 Rev Q 21