Before You Clean; Preparing The Machine; Filling Formula & Water Tank - Bissell SPOTCLEAN PRO 1558 SERIES User Manual

Assembly

Before you clean

1. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
2. Pretreating (optional):
2a. Pretreating is recommended to
improve cleaning effectiveness for
heavily soiled carpet in high traffic
areas such as entryway and hallways.
2b. BISSELL Stain Pretreat
Spray the BISSELL Stain
Pretreat formula onto heavy traffic
areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, following the
instructions below.

Preparing the machine

1.
Release flex hose by twisting the
hose secure latch clockwise. Unwrap
flex hose completely.
2.
Attach the desired tool to the hose
grip until it snaps together. Make
certain the tool is securely attached.
3. Twist the Quick Release™ cord wrap
clockwise to unwrap the power
cord completely and plug into
grounded outlet.
Filling the formula & water tank
1. Remove tank from the back of the
machine by lifting up tank carry handle.
Note: This tank was designed with a
flat bottom so it can be easily filled.
2. Unscrew the black cap and remove
bottle insert.
3. Fill tank with hot tap water (140° F/60° C
MAX) to the water
fill line. Add 60 mL of BISSELL 2X formula
to the tank.
4.
Replace the bottle insert in the tank and
tighten the black cap. Replace the tank
on the portable machine.
ATTENTION
Some Berber carpets have a tendency to fuzz with
wear. Repeated strokes in the same area with an
ordinary vacuum or deep cleaner may aggravate
this condition.
2b.
Tip
Make only one trip to
the sink by bringing
the entire portable
cleaner. Fill and empty
in the same trip.
1.
www.BISSELL.com
2.
5