Table of Contents
Advertisement
Other Operations
Creating your own program
(Program Play)
1
Press FUNCTION +/ (or FUNCTION on the unit)
repeatedly to select the CD function.
2
Press PLAY MODE
repeatedly until "PGM" appears
while the player is stopped.
3
Press /
repeatedly until the desired
track or file number appears.
When programming files, press
+/
repeatedly
to select the desired folder, and then select the desired
file.
Selected track or file
Total playing time of program
(including selected track
number
or file)
4
Press
(or ENTER on the unit)
to add the track
or file to the program.
" . " appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press (or
CD on the unit)
.
The program remains available until you open the disc
tray. To play the same program again, press (or
CD on the unit)
.
To cancel Program Play
Press PLAY MODE
repeatedly until "PGM"
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR
while the player is stopped.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (See "Listening to the
radio").
2
Press TUNER MEMORY
.
Preset number
3
Press +/
repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press
.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE
repeatedly until "PRESET" appears, and
then press +/
repeatedly to select the desired
preset number.
Using the Timers
The system offers two timer functions. If you use the Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Use buttons on the remote to use the timer functions.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP
repeatedly. If you select "AUTO, " the
system automatically turns off after the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD, tuner or iPod at a preset time.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/
to adjust the volume.
To start from a specific track or file, create your own
program.
2
Press TIMER MENU
.
3
Press /
repeatedly to select "PLAY SET?, " and
then press
.
"ON" appears, and the hour indication flashes.
4
Set the time to start playback.
Press /
repeatedly to set the hour, and then
press
.
The minute indication flashes. Use the procedure
above to set the minutes.
5
Use the same procedure as in step 4 to set the time
to stop playback.
6
Select the sound source.
Press /
repeatedly until the desired sound
source appears, and then press
. The display
shows the timer settings.
7
Press
to turn off the system.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
1
Press TIMER MENU
.
"TIMER SEL?" flashes in the display.
2
Press
.
3
Press /
repeatedly to select "PLAY SEL?, " then
press
.
To cancel the timer
Repeat the same procedure as above until "TIMER
OFF?" appears in step 3, and then press
.
To change the setting
Start over from step 1.
Note on the iPod touch user
The Play Timer may not be activated depending on the status of the
connected iPod touch.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
HCD-BX20i/BX50BTi
7
Hide quick links:
Advertisement
Table of Contents
