Connect The Ac Adapter - Pioneer ddj-wego4 Operating Instructions Manual

STEP 2 Connecting the peripheral devices to
this unit
Connecting speakers with a built-in
amplifier to this unit with an audio
cable (RCA)
Connect speakers with a built-in amplifier, power
amplifier, etc. to the [MASTER] output terminals.
! An audio cable (RCA) is not included with this product. Please pro-
vide it yourself separately.
R L
Speakers with built-in amplifier,
power amplifier, etc.
! For details on connecting the input/output terminals, see the
Operating Instructions.
! Set the volume of the device connected to the [MASTER] terminals
(speakers with built-in amplifier, power amplifier, etc.) to an appropri-
ate level. Note that the output sound may be loud if the volume is set
too high.
Connect with an iPhone / iPad.
Connect this unit and the iPhone / iPad using the cable
included with the iPhone / iPad.
! Be sure to connect directly using the cable included with the iPhone
/ iPad. A USB hub cannot be used.
iPhone / iPad
8
En
Cable included with iPhone / iPad

Connect the AC adapter

1 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
! Connect the power cord after all the connections between devices
have been completed.
! Be sure to use the power cord and AC adapter included with this
product.
AC adapter (included)
Power cord (included)
To power outlet
2 Turn on the power of the iPhone / iPad.
3 Press the [STANDBY/ON] button of this unit to turn
on the power of the unit.
4 Turn on the power of the device (speakers with
built-in amplifier, power amplifier, etc.) connected to the
output terminals.
DC plug