Table of Contents
Advertisement
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.
4 Use your
This section helps you use the SoundBar to play
DVD
audio from connected devices.
Before you start
•
•
Adjust the volume
1
Volume indicator
•
•
•
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
SoundBar
Make the necessary connections
described in the Quick Start Guide
or download the User Manual from
www.philips.com/support.
Switch the SoundBar to the correct source
for other devices.
Press +/- (Volume) to increase or decrease
a volume level.
•
To mute sound, press
•
To restore the sound, press
press +/- (Volume).
The higher volume level you change to, the
more LED indicators light up. If you do not
press the volume button for three seconds,
the volume indicators light off.
All the LED indicators blink three
times when a volume level is set to the
maximum or minimum.
When sound is muted, the current source
indicator blinks.
.
again or
EN
7
Hide quick links:
Advertisement
Table of Contents
