Using Templates; Cable Label; Text Label - Brother P-TOUCH H110 User Manual

3

USING TEMPLATES

Cable Label

This function allows you to create two types of
cable labels.
Cable Label template 1 :
Cable Label template 2 :
Example: Cable Label 1
[Select Layout]
text
[Copies: ]
NOTE
• Label length is auto only. You cannot set label
length.
• To clear all text and settings or text only, press
/
.
• You can set the Font, Size, Style and Frame
while entering texts.
• To exit templates and return to the text input
screen, do one of the following:
a) Press .
/
b) Press
when "Print" appears.
• To preview labels, press the Preview key when
[Print] is displayed on the LCD.
• You cannot save labels created using templates
to memory.
/
[Input Text] Enter
[Print]
/ /
-
[Text&Format]/[Text Only]
to select [Exit], and then press

Text Label

This function allows you to create various labels
using the built-in templates. See the Text Label
templates table included in this guide.
Example:
[Template that includes one
repeated graphic]
/
[Select Category]
[Select Design]
[Input Text]
[Set Label Length]
999 mm] [Print]
/
-
NOTE
• Press the Space key to return to the initial
setting for "Label Length" mode. The initial
setting is [Auto].
• To clear the text, move the cursor to the right side
where you want to clear, and then press
• To clear all text, press
appears. Press
• You cannot set the Font, Size, Style and Frame
while entering text.
• If you set the longer label length than the default
([Auto]), the text label is printed repeatedly
within the set length. The text label may not be
fully printed depending on the set length.
• The available label length setting changes
depending on the number of texts you entered.
• These templates are available when using
12 mm wide tape cassettes.
• You cannot edit the templates.
[Decorative]
/ [Text]
/
/ [Auto/30-
[Copies: ]
, then "All Clear"
to clear. Press
/
.
to cancel.