Progressive - Turning On/Off - Philips DVP3500 User Manual

DVD Setup Menu Options

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, the a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 30.
1
In 'Video', press OK to enter the
submenu.
2
Press 3 4 to highlight {Progressive}, then
press OK.
3
Press 3 4 to highlight one of the options
below:
Off
To disable Progressive Scan function.
On
To enable Progressive Scan function.
To return to the previous menu, press
TIPS:
To remove the menu, press
30
01-41-DVP5900_US3
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
➜
If a distorted picture appears on the
TV screen, wait for 15 seconds for auto
recovery.
To reset Progressive Scan to OFF:
1
Press OPEN CLOSE
system to open the disc tray.
2
Press 2 followed by AUDIO the remote
control.
➜
The DVD background screen will
appear on the TV.
OK
.
SYSTEM MENU
30
0
on the DVD
.
22/09/05, 2:09 PM