Call Settings - Asus ZENFONE GO ZB450KL User Manual

Call Settings

Configure the settings for your incoming or outgoing calls, call barring, home dialing, and more.
Launch Quick settings then tap
Tap > Settings.
2. Tap Call settings, then select any of these settings that you want to set up.
Block call settings
Block function setting
Block List
Incoming call settings
Phone ringtone
Vibrate when ringing
Call forwarding
Call rejection message
Headset settings for
incoming calls
Outgoing call settings
Dial pad touch tones
Connection alert settings Turn vibration on or off for the connection alert settings.
Fixed Dialing Numbers
(FDN)
Home dialing
Other settings
Auto call recording
Call duration
Voice mail
Additional settings
No background during
the call
DTMF tones
58 Chapter 4: Keeping in touch
.
Configure the settings for the Block function.
Display the list of your blocked contacts or numbers.
Set up the ringtone for your SIM 1 or SIM 2 card.
Tick when you want your ASUS Phone to vibrate when it rings.
Use this feature if you want to send calls to another number on
unanswered, and When unreachable.
Select or create the message that you want to send when you're
unable to answer an incoming call.
When you've connected a Bluetooth or wired headset to your
ASUS Phone, you can select to automatically answer or set the
wait time for incoming calls.
Tick or untick to enable or disable the Dial pad sound in the
Phone app.
Set up these settings when you want to restrict outgoing calls
only to those numbers in your FDN list, or to numbers with
certain prefixes. Inquire from your mobile service provider about
availing the FDN service for your SIM card.
Enable and configure your Home dialing settings. For more
details, see Home dialing.
Configure the settings for the auto call recording function.
Display the length of calls between two parties. Call duration is
measured differently depending on the mobile service provider.
Set up the voicemail settings, if you've subscribed to a voicemail
service with your mobile service provider.
When enabled, a black background is displayed during a call.
Sets the length of DMTF tones.
Always forward, When busy, When