Geneko GWR402HSW-S Quick Start Manual

Gwr hs router

Download this manual

Enlarged version

TURN LOGGING ON

When troubleshooting router make sure logs are turned on.

You should send logs to Geneko when submitting support request.

* Click on MANAGEMENT -> LOGS link from the menu on the left side of the

screen.

* Click on LOCAL SYSLOG radio button, then click on SAVE button.

* Set appropriate log size and click on SAVE button.

* Log is now available for download from router to your computer when you

click on EXPORT LOG button.

O cial web site: https://www.geneko.rs

GENEKO is the registered trademark of GENEKO Company.

QUICK START

G U I D E

GWR HS Router

GWR402HSW-S

Need help?

Do you have a question about the GWR402HSW-S and is the answer not in the manual?

Page 1 G U I D E When troubleshooting router make sure logs are turned on. You should send logs to Geneko when submitting support request. * Click on MANAGEMENT -> LOGS link from the menu on the left side of the screen.
Page 2 WHAT’S IN THE BOX: PORTS & CONNECTORS RS-232 ETHERNET CONSOLE POWER CONNECTOR CONNECTOR CONNECTOR CONNECTOR 1. GSM router RESET BUTTON 2. AC/DC adapter The front panel of GWR-HS Router 3. Ethernet cable 4. RS-232 console cable 5. GSM antennas, 2 pieces 6.
Page 3: Connecting Router
INSERTING SIM CARDS CONNECTING ROUTER Warning: do not insert or eject SIM cards while router is Warning: Use only the router’s box power supply. powered on. Make sure to disconnect router from AC/DC * Connect antennas to router. Make sure to tighten antennas so that they adapter before inserting or ejecting SIM cards.
Page 4: Quick Setup
QUICK SETUP ADMINISTRATION WEB PAGE * Once logged in to administration web page, click on SETTINGS-> ETHERNET * Add network 192.168.1.0/24 to the interface on your PC SETTINGS->NETWORK link from the menu on the left side of the screen * Optional: Ping 192.168.1.1 to check is the router reachable * Set IP Address and Subnet Mask and click on SAVE button * Open your Web browser (e.g.