Video Cassette Playback 15 - Philips DVP3345V/17 User Manual

E8E20UD_EN1 8/23/07 1:25 PM Page 15
Read and follow the steps below to play a tape.
1
Turn on the TV. Set it to the correct Video In
channel. (Check your TV owner's manual for details.)
Details are on page 8.
2
Insert a tape in the cassette compartment of the
DVD/VCR. VCR light will appear on the front of the
DVD/VCR. If the tape's record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary. VCR light will appear
on the front of the DVD/VCR.
●
If playback does not start automatically, press VCR, then
press PLAY B.
●
Press STOP C to stop playback.
●
Press REW h to rewind the tape.
●
After the tape stops, press STOP/EJECT CA on the front
of the DVD/VCR to remove the tape.

Video Cassette Playback 15

• Other tape playback features are
• If AUTO REPEAT is ON, playback
• You must connect the DVD/VCR
1
Turn on the TV.
2 Insert a tape in the
DVD/VCR.
OPEN/CLOSE
1 2 3
4 5 6
TRACKING
7 8 9
CLEAR TITLE
+10 0
VCR SETUP DVD
DISC
INPUT MENU
OK
REW PLAY FFW
STOP PAUSE BACK
DISPLAY SUBTITLE ZOOM AUDIO
ANGLE SEARCH REPEAT REPEAT
A-B
REC SPEED MODE TIMER SET
Helpful Hints
on pages 29-32.
will begin when you insert a tape,
even when the record tab is
intact. Details are on page 29.
to a TV using the audio/video
cables in order to use the VCR
features.These hookups are
explained on pages 9 and 11.