Connect Audio Cables; Route Audio To Other Devices; Connect Usb Fl Ash Drive; Connect Power - Philips DVP3354 User Manual

Connect audio cables

Connect the audio from this product to the TV to
allow sound output through the TV.
1
Connect the audio cables (not supplied) to:
• the AUDIO OUT L/R jacks on this
product.
• the audio input jacks on the TV.

Route audio to other devices

Route the audio from this product to other devices
to enhance audio play.
Connect to digital amplifi er/receiver
DIGITAL
OUT
COAXIAL
1
Connect a coaxial cable (not supplied) to:
• the COAXIAL jack on this product.
• the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
1
Connect the audio cables (not supplied) to:
• the AUDIO OUT L/R jacks on this
product.
• the audio input jacks on the device.
8 EN
AUDIO IN
DIGITAL IN
AUDIO IN
Tip
•
You can optimise the audio output (see 'Adjust settings'
> [Audio Setup] > [Analogue Output]) for details.
Connect USB fl ash drive
1
Connect a USB fl ash drive to the
this product.
Note
•
This product can only play/view MP3, WMA, DivX or
JPEG fi les that are stored on a USB fl ash drive.
•
Press the button to access the content and play
the fi les.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the product.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.

4 Get started

Prepare the remote control

1
Open the battery compartment.
2
Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
jack on