Play Video - Philips DVP3354 User Manual

1
Press to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and
start disc play.
• To view disc play, turn on the TV to the
correct viewing channel for this product.
• To stop disc play, press
Note
•
Check the types of discs supported (see "Specifi cations"
> "Play media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preferences" > [Parental
Control]).
•
If you pause or stop a disc, the screen saver appears after
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
•
After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches
to standby.

Play video

Note
•
Some operations may not work with some discs. See the
information accompanying the disc for details.
Control video play
1
Play a title.
2
Use the remote control to control the play.
Button Action
Start, pause or resume disc play.
Stop disc play.
Skip to a previous/next title or
,
chapter.
Search fast-backward or fast-
,
forward. Press repeatedly to change
the search speed.
Search slow-forward or slow-
,
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
AUDIO/ Select an audio language or channel
CREATE available on a disc.
MP3
10 EN
.
Button Action
SUBTITLE Select a subtitle language availabel
on a disc.
REPEAT Select or turn off repeat mode.
Repeat options may vary from disc
type.
ZOOM Fit the picture format to the TV
screen.
Press repeatedly until the image is
scaled to fi t to the TV screen.
ZOOM Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
Access the play options and display
INFO
the current disc status.
Access DVD menu
1
Press DISC MENU to access the disc root
menu.
2
Select a play option, then press OK.
• In some menus, press the
buttons to input your selection.
Access VCD menu
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
Note
•
See "Adjust settings" >
to turn PBC on or off.
1
Display the contents menu via one of the
following ways:
• If PBC is on, load in a VCD/SVCD.
• During play with PBC on, press
BACK.
2
Press the Numeric buttons to select a play
option, then press OK to start play.
• If PBC is turned off, it skips the menu
display and starts play from the fi rst
track.
Preview disc contents
1
During play, press
»
The disc status menu is displayed.
Numeric
[Preferences] > [PBC] on how
INFO.