4 Get started
Prepare the remote control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should
be disposed of properly.
Find the correct viewing
channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user
manual on how to select the correct
channel.)
12
EN
Select menu display language
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
•
The language options may vary from
different regions.
1
Press SETUP .
» [General Setup] menu is displayed.
2
Select [OSD Language] , then press .
3
Press
to select a language, then press
OK .
Turn on progressive scan
Note
•
To use the progressive scan feature, you must connect
a progressive scan TV with the component video jacks
(see "Connect" > "Connect video cables" > "Option 1:
Connect to the component video jacks" for details).
Video Setup
TV System
TV Display
Progressive
Picture Setting
English
On
Off