Cleaning And Storage - JOCCA 6208 Instruction Manual

8-EN
-This device has been designed to pedal while you are seated. It is is not
stable to stand up on it. The maximum user weight capacity of this bike is
100 kg.
-The machine cannot be used by more than one person at the same time.
-Place the device on a horizontal surface. Remember that in order to avoid
damages, the device must be used in spacious places.
-Remember that when you are using the machine you are exercising. The-
refore you should wear the proper clothes and footwear. Do not use clothes
which may get caught or which may obstruct the device mechanism.
-If you notice abnormal symptoms such as sickness, pain in the chest, etc.,
immediately stop the training session and ask your doctor.
-The use of the device must be restricted to that for which it has been created
and the indications of the manual must always be taken into account.
-In order to avoid possible pull of a muscle or injuries, before using the devi-
ce, always do stretching exercises in order to warm up the muscles properly.
-People wearing a pacemaker, a defibrillator or any other implanted electro-
nic device are advised to consult your doctor before using the equipment.
-Pregnant women are advised to consult your doctor before using the equipment.
-Remember that you must not use the device if it is not working properly.
-Use only the accessories recommended by the manufacturer.
REMEMBER THAT PEOPLE WITH HEALTH PROBLEMS MUST ASK
THEIR DOCTORS BEFORE STARTING A PROGRAM OF EXERCI-
SES.
ASSEMBLY
1.Attach base support to main product structure by joining both parts with
2 bolts (f2) 2 curved washer (f4) and 2 screws (f5) in both holes (figure 1).
2.Put the handlebar together with the top main structure by making their
holes coincide and fixing them with 1 bolt (f1) 1 washer (f3) and 1 screw
(f5) (figure 2).
3.Install the pedals in the first two holes that could be found above front
mini exercise bike. Place them by putting the work tool into the inside of the
device. Affix between them placing 1 bolt (f1) washer (f3) and 1 screw (f5)
in both holes (figure 3).
INSTRUCTIONS FOR USE
-Before starting the exercise, place the device on a flat surface and adjust
the pedaling resistance according to the strength desired for the exercise. In
order to obtain more resistance, turn the dial counterclockwise.
-Sit down on a stable and permanent surface, at a comfortable height and
distance in order to place feet and hands on both handles without effort.
-In order to adjust the height and inclination, remove the height adjustment
ring pull and move the main structure up and down until the desired point.
After doing this, introduce the ring pull.
-Put feet in pedals in the safest way and start the training.

CLEANING AND STORAGE

-Clean the device using a wet cloth first and then with a dry cloth.
-Store the device in a dry place.
-To store the product, take out the height adjustment ring pull and fold the
structure.
9-EN