PON
TEL
Telephone port status
FE/GE
LAN port status
PWR
1.5 Environmental parameter
Item Specification
Dimension
160mm(L) x 120mm(W) x 33mm (H)
Rated current
1.0 A
Rated voltage
12 V DC
Operation temperature
Operation humidity
2. Introduce configuring the network
2.1 Prepare for login the ONT web management
Before you login the ONT, you should confirm the connect between the ONT and your PC
is normal.
Configuring the IP address of your PC to 192.168.100.X (2~254) , subnet mask
Step 1
is 255.255.255.0,.
Step 2 Ping IP address of the ONT (Default address is 192.168.100.1). If the PC can get
right reply from Ping command, it is mean the connecting between the PC and ONT is
normal.
【Figure 1】
ONT Register
Power status
0℃—50℃
5%—95%
Off: Optical in normal
On: Success to register to OLT;
Blinking: In process of registering to OLT;
Off: In process of registering to OLT;
On:The connection between the TEL port and the
voice server has been set up
Blinking:The voice service of the TEL port is
established;
Off:The connection between the TEL port and the
voice server is not set up.
On: Ethernet connection is normal;
Blinking: Data is being transmitted through the
Ethernet port;
Off: Ethernet connection is not set up;
On: The ONT is power on;
Off: The ONT is Power off;
5