Installation Instruction - Mounting Dream MD2413-MX Installation Instruction

Installation instruction

Step 1
Remove the bolt s (H) with Allen key (F) to separate wall plate
unit (A) into two pieces.
Concrete wall
OR
1. Make sure the logo on the wall plate is upward as the picture shows.
2. Level the wall plate to make sure the plate is centered on the back of the TV before marking the holes.
3. The wall must be capable of supporting five times the weight of the TV plus the mount.
Step 2
16"
Wood stud
Use a stud finder to make marks at
the edges of the stud, and mark a
centerline of the stud. Then place
wall plate along the centerline and
use pencil to mark 2 hole locations
on the wall.
3
Step 2
Use wall plate as a template
and pencil to mark 4 hole
locations on your desired
height of the wall.
H
Step 3
Use 10mm or 2/5" diameter drill bit
to drill 4 holes at marked positions
to a depth of 64mm/ 2.5".
Step 3
4mm
(5/32")
Use 4mm or 5/32" diameter
drill bit to drill 2 holes at
marked positions to a depth
of 64mm/ 2.5".
Wall plate
TV plate
Step 4
E
10mm
(2/5")
Put 4 anchors (E) into drilled
holes, and tap each anchor flush
with the wall by using a hammer.
Then put 4 lag bolts (D) into the
anchors, and tighten each bolt by
using a spanner to mount the
wall plate securely.
Step 4
Put 2 lag bolts (D) into the drilled
holes, and tighten each bolt by
using a spanner to mount the wall
plate securely.
D
D