Safety; Work Area Safety Recommendations - Cushman Spraytek DS175 Safety & Operation Manual

1

SAFETY

1.5

WORK AREA SAFETY RECOMMENDATIONS __________________________________

Read this section carefully and thoroughly in order to
become familiar with the proper safety techniques
used when operating the sprayer.
Be sure to obtain an operation demonstration from your
Cushman dealer before attempting to operate this
vehicle.
The operator must be familiar with the function of all
vehicle controls as well as the operating characteristics of
the vehicle. This is best accomplished through careful
application of proper operating procedures.
The safety of the operator and bystanders depend on
the operator's good judgement in operating and
maintaining this vehicle.
1. It is recommended that all spray technicians obtain a
CPA (Certified Pesticide Applicators) license or
equivalent. Operators should request, read, and
follow all appropriate federal, state, and local
regulations pertaining
chemical mixing, and storage. Be informed not a
victim .
!
WARNING
DO NOT operate this equipment until you have read
the operator's manual completely. Operators must be
confident and sure of their skills before operating this
unit. Only properly trained persons with proper safety
equipment should be allowed to operate this vehicle.
Use caution when operating on slopes, turning, and
braking. Avoid full throttle starts. The large liquid
payload reacts differently during vehicle movement
than an equal sized dry load. This is heavy equipment
that could cause serious injury or death to the
operators and/or bystanders if used improperly or
overturned.
Never allow minors to operate the vehicle at any time.
2. We recommend a runoff recovery or containment
system for the mix and load area. If one is not
available be certain the runoff does not contaminate
water supplies, public sewers, or natural wet land
areas. Check your local regulations for requirements
in your area.
3. Do not allow non-sprayer personnel to enter the mix
and load area. All mix and load operations should
be performed only with proper safety equipment in
place. Refer to the chemical manufacturer's MSDS
for required safety equipment, mixing, and handling
procedures.
6
to spraying equipment,
4. Use an anti-backflow protection device on fill hoses
and water source outlets especially if using a public
water system. An air gap filler (anti siphon) is
available as an optional accessory for the Spraytek.
5. Never place fill hose into tank. This could
contaminate the hose.
6. Keep hands, feet, and other body parts away from
moving components. Restrain loose clothing and
use caution around moving parts.
7. Follow recommended safety and maintenance
schedules for this equipment. Do not operate this
equipment without safety devices in place or if the
equipment is not working correctly.
8. Keeping proper records in regards to chemicals
being used, batch size, time, date, areas treated,
weather conditions, and unusual occurrences can
protect you and others should any problems occur
after turf application has been made.
9. In case of an accident, injury, or unprotected
exposure notify your supervisor immediately. If
necessary, operator or supervisor should contact the
poison control board, EPA, and/or local fire
department to help with the situation.