XPEECH 2S Operation Manual page 9

S I P Operation Manual
4 ports gateway model: 4S / 4O / 2S2O / 3S1O
Front Panel
VoIP Gateway
Power Indicator: Green light indicates a normal power supply.
Run Indicator: Blinking green light indicates normal operation.
Alarm Indicator: When the system starts up, the red light will blink. It also indicates the
gateway's abnormal operation.
Voice ports indicators: Indicate connection and activity on the port 1 – 4.
WAN stands for the WAN Port Indicator.
L1 – L4 stands for the LAN Port Indicator.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40
seconds, the Alarm indicator will go off, the Run indicator will blink green, and the Power
indicator will stay green (under normal operating conditions). If the Alarm indicator continues
to blink, then the system is attempting to connect with your ISP and has yet to obtain an IP
address.
Once the WAN is connected, the WAN indicator will light up green and, if data is being
transmitted over the Internet, the indicator blinks green and orange.
To restore factory default settings (IP address, User's Name, Password):
(1) Disconnect the power plug.
(2) Press and hold the reset button.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
WAN, LAN indicators
L4 L3 L2 L1 WAN
Voice ports indicators
P4 P3 P2 P1
Status indicators
Alarm RUN Power
5