XPEECH 2S Operation Manual page 39

S I P Operation Manual
LAN QoS
Users can allocate bandwidth for various types of network traffic with each LAN port and apply the
LAN QoS control function on incoming and outgoing traffic flows, or both of them. The real
throughput of incoming rate is depended on downstream bandwidth of WAN QoS and that of
outgoing is depended on upstream bandwidth. Incoming and Outgoing flow can not exceed the
limit bandwidth rate of total throughput.
Priority: The gateway can prioritize LAN ports. Data from HIGH priority port are delivered
prior to those from LOW priority port while they arrive at the same time.
Flow Control: Enable or Disable Flow control.
Incoming Rate Limit: Set the incoming (from WAN to LAN) rate limit of a specific LAN port
(can not exceed the real downstream bandwidth).
Outgoing Rate Limit: Set the outgoing (from LAN to WAN) rate limit of a specific LAN port
(can not exceed the real upstream bandwidth).
35